How We Fixed Metal Roof Leaks at Awfis Guindy in 6 Working Days

How We Fixed Metal Roof Leaks at Awfis Guindy in 6 Working Days

After this year's northeast monsoon, Awfis asked us to look at roof leaks at their co-working centre in Guindy, Chennai. The roof is metal sheet. We sealed it with a bitumen membrane system and finished in 6 working days. The centre stayed open the whole time.

This post covers what we found, what we did each day and what other office and commercial building owners in Chennai can learn from it.

Why Awfis called us

Chennai gets most of its rain between October and December. That's when a tired metal roof starts to show its age. At the Awfis Guindy centre, members had noticed drips near the ceiling, stained tiles and damp patches after heavy showers.

A co-working space can't afford this. People book desks and meeting rooms by the hour. A bucket under a leak in a cabin is a lost booking, and wet false ceilings can damage lights and AC ducts.

Awfis spoke to a few waterproofing contractors in Chennai before choosing. We were invited to inspect the roof. We didn't send a quote first. We went up to find out where the water was getting in.

What we found on the roof

Our team walked the roof with safety lines and checked the ceiling from inside for daylight and water stains. Then we mapped every leak point.

The sheets themselves were mostly sound. The problems were at the joints. We found:

  • loose and rusted screws, many with worn-out rubber washers
  • open side and end laps between sheets
  • gaps at the ridge cap and flashings
  • old sealant that had cracked and pulled away
  • rust patches around fasteners and along the gutter edge

This is the usual story with metal roof leakage. Water rarely comes through the sheet. It comes through the hundreds of small openings where sheets meet, overlap or get screwed down.

We explained this to the Awfis facility team in plain language, with photos. We also gave them a written report. It listed each leak point, the cause, the system we recommended, the 6-day schedule and the warranty terms. They approved the report and we started work.

The system we used: metal sheet and bitumen membrane waterproofing

Painting over a leaking metal roof doesn't hold for long. The coating cracks at the same joints that were leaking. So we treated the joints first and then protected the surface.

Here is the method, in the order we did it:

  1. Cleaning: we brushed and washed off the dust, bird droppings, loose rust and old sealant.
  2. Fastener service: loose screws were tightened and bad ones replaced with new washered screws. Each head got a cap of PU sealant.
  3. Rust treatment: corroded patches got a rust converter and a zinc-rich primer.
  4. Lap and joint sealing: we covered overlaps, ridge caps and flashings with self-adhesive aluminium-faced bitumen tape. Every strip was rolled down firmly.
  5. Gutter lining: gutters were cleaned, lined and the outlets cleared.
  6. Water test: we hose-tested each treated section and checked the ceiling from below.

You can read more about each material on our metal sheet and bitumen membrane waterproofing service page.

How the 6 working days went

We planned the schedule around the centre's working hours. Most of the work happens on top of the roof, so members inside weren't disturbed. Noisy work like screw replacement was kept to quieter hours.

Days 1 and 2 went into cleaning, fastener service and rust treatment. Days 3 to 5 were for the bitumen tape on laps, ridges and flashings, plus the gutter lining. Day 6 was the water test and a final walk with the Awfis team.

We checked each stage before starting the next one. If a section failed the hose test, we fixed it the same day. None of the treated areas leaked when we handed it over.

A 5-year warranty on the work

Awfis was happy with the result. We gave a written 5-year warranty on the job. For a facility manager, that matters more than the price. It means a clear contact and clear terms if anything shows up after the next monsoon.

Our warranty page explains how claims work.

What Chennai building owners can take from this

If you manage an office, warehouse, factory shed or co-working space with a metal roof, a few things are worth knowing.

Most metal roof leaks start at the screws, laps and flashings. If you fix those, you've fixed most of the problem. Find them before the monsoon, too. A dry-weather inspection is quicker and the sealants cure better.

Ask for a written report before you pay for anything. You should know where the water enters and why, and which materials will be used.

Commercial work also needs a plan around your operations. You can keep the building open if the contractor works in sections and schedules noisy jobs sensibly.

If your building has a concrete terrace and not a metal roof, the method is different. See our terrace waterproofing service. For damp on external walls, we do sidewall waterproofing. And if the leak shows up as cracks in a concrete slab or a basement, PU injection grouting is usually the fix.

Need your roof inspected?

Seeing damp ceilings, rust stains or drips during rain? Get the roof checked before the next heavy spell. Watrex Waterproofing works with offices, co-working spaces, warehouses and homes across Chennai.

Contact us for a site inspection and a written report.

FAQ

What causes leaks in a metal sheet roof?

Most often, it's the joints. The sheets themselves are seldom at fault. Screws back out, rubber washers deteriorate, side and end laps separate, sealant at ridge caps and flashings develop cracks in the sun. When the hole is there, the water is traveling along the bottom of the sheet before it drips out. That's why the ceiling stain is not below the leak.

How does bitumen membrane waterproofing work on a metal roof?

On a metal roof we use self-adhesive bitumen tape with aluminium face. It sticks over laps, ridge caps and flashings and seals the gap. The aluminium face reflects the sun, so the bitumen underneath it does not dry out so quickly. On flat concrete roofs, we use torch applied APP bitumen membrane.

How long does metal roof waterproofing take?

It would depend on the size of the roof and number of leaks. We took 6 working days on the Awfis Guindy site as it included a water test, it could take a day or two for a small shed. You will receive the timeline in our report after we have surveyed your site.

Can you waterproof a roof while the office is running?

Yes, in the majority of cases. The vast majority of works take place from the roof. During Awfis, the centre remained operational and members worked. We would schedule noisy works outside of your normal working hours and partition the roof in sections.

How much time does bitumen tape waterproofing last?

Aluminium-faced bitumen tape has a life expectancy of around 7-10 years. PU sealant on fasteners has similar service life. The service life depends on the number of hours of sunlight and surface preparation. We specify the warranty period in each quotation.

How much does metal roof waterproofing cost in Chennai?

It all depends on how big the roof is, the state of the sheets, the number of areas that are leaking, and the materials involved. No set rate! We assess it, then you'll receive a written quotation.

Share This Post

More To Explore

Book Your Expert Site Visit

Share your requirement and our waterproofing specialists will inspect the site and send you a tailored quotation.

Your information is safe and will not be shared.